| Applications: For single stage heat/cool equipment |
| Any zone sets modes provides true independent control for each zone |
| Continuous fan be zone individual zone thermostats can call for fan operation independently for ventilation |
| Zone changeover based on time, if call for opposite modes exist, the control panel will alternate to satisfy each call |
| Fan purce: assures air is directed to lasts zone(s) calling |
| Short cycle protection, protects the HVAC equipment from too frequent cycles |
| Maintenance free, no maintenance or adjustment needed after installation |
| Plenum temperature control (adjustable), protects equipment from excessive high and low temperatures caused be reduced airflow when small zone are calling |
| LED status indicators(visible through cover), simplifies start up and troubleshooting |
| Time delay override speed checkout for the installed |
| Work with 2 or 3 wires dampers, compatibility if you are changing our an old panel with 3 wires damper |
| Fuse protection protects the control panel against miss wiring |
| Extra fuse on board: convenience if fuse blows |
| Adjustable purge timing: compatibility with all brand of equipment |
| Elec/non-elec switch proper control of the fan (G-terminal) for either electric or fossil fuel furnaces |
| 140 deg F temperature |
| 50 or 60 Hz frequency |
| Can use 18 or 20 AWG solid (non-stranded) wires |
